X32 – How do I Setup for Live Streaming with V4 firmware?

X32 Firmware Download

Controls: Up Arrow - Gas Down Arrow - Brake Left and Right Arrows steer Space Bar - Handbrake Currently Available for: Windows XP - 7 (8 Possibly) x32-x64 Mac OSX Linux.x86 IOS Android OS - 3.0 or higher To see the other copies or obtain the downloads for these platforms, click View All Files.

This guide is intended to assist with setting up a stereo output stream from your X32 to a streaming software like OBS or FB Live.

First, if you are using a PC make sure you have the proper driver installed. There are multiple drivers available but that is because they are for the different expansion cards. Select the driver that matches your expansion card (X-USB, X-UF, X-LIVE)

You can find the downloads for all of the X32 drivers at:

1. The original Open Broadcaster Software bundle comes with both 32-bit and 64-bit versions and is available only for Windows. This program and its source code are freely available for all to use and change under the GNU General Public License v2.0 (or greater), which you agree to when using this program or its source code.
2. Download video, audio, subs from YouTube, grab photos from Instagram, make slideshows and much more! 77EEF0E5-0BD5-4389-9FED-3A516652DCFC EFD94688-37A7-4E25-BF1A-C4F3304D48DA.

Now, after connecting via USB to your computer from the expansion card, you should see that your Mac or PC recognizes that the expansion card has been connected and you should have options within your operating system’s sound settings to choose the X-USB, X-UF or X-LIVE as your Playback or Recording device.

You should also see the expansion card as an input option with your streaming software (OBS, FB Live, YouTube etc). Select the Expansion card as the input device. Typically with streaming software, the software will only look at the first two channels coming in via USB from the mixer, so it will be important to send the mix that you want to the first two USB Outputs on the mixer, so that your streaming software receives the right information.

In order to do this, follow the process below.

1. Open the ROUTING menu on your X32 and Navigate to the CARD tab.
2. In the first column (1-8) assign P16 1-8 (this is assuming you are NOT using a P16 system for monitoring purposes. If you are using a P16 system you should assign OUTPUT 1-8). This is pictured below. You will notice that on the right side of the menu you can see a breakdown of which signals are routed to the outputs. That is the next step
   
3. Navigate to the P16 page (OUT, if using the OUTPUT 1-8 option because you have a P16 system in use). The left most column in this menu is the option to select which output “pathway” you are working with. Highlight output 1 (01 @).
4. With 01 @ highlighted, use the 4^th column (OUT SIGNAL) to select MATRIX 1, and use the 5^th column (TAP) to select POST FADER
5. Repeat for Output 2 (02 @) and MATRIX 2, POST FADER
   
6. On the surface of your X32, select MATRIX 1. Open the HOME menu and press the LINK button (1^st encoder) to link MATRIX 1 and MATRIX 2 as an LR pair.
7. Now, you have a decision to make. You will have to decide if you want the mix going out to your stream to be identical to the Main Mix (the House mix) or if you need it to be a separate mix. If you choose to run a complete separate mix, select two mix busses (for example, 1 and 2) SELECT BUS 1. Open the HOME menu and hit the LINK button to LINK busses 1 and 2.
   
8. Now create your stream mix using the selected busses. To send signal to the busses you can use the SENDS ON FADER feature or the HOME>SENDS menu with your channels selected.
9. Now that you have either your pair of busses or your Main Mix ready to be sent out to the stream, SELECT either the Main LR or MIX BUS 1.
10. Open the HOME>SENDS menu. You should see 6 faders on the screen. These represent the 6 matrices. Raise the digital faders for 1-2. They should raise together as they are linked. This step is sending your mix to the matrix channels (matrix channels which you’ve already assigned to the USB Outputs 1-2).
11. Press the DOWN arrow (Layer Down) button to expose the Mode 1-2, Mode 3-4 and Mode 5-6 options above the 1^st, 3^rd and 5^th encoder. Rotate the 1^st encoder counterclockwise and select PRE. This will change the send TAP point from the Main LR or Mix Busses to the Matrix to PRE FADER which will allow you to freely lower the LR mix or Busses without adjusting the stream level.
    
12. Finally, open the MATRIX bank of faders on the X32 and raise the faders for MATRIX 1-2
13. You should now be able to hear and see your mix signal present in the streaming software

Drivers & Software Updates Search

Do you have the latest drivers for your device? Our engineering team is constantly adding, updating and improving our drivers to ensure optimal performance.

Latest Updates

X32 Edit Software Download

Driver Updates

Firmware Updates

X32 Edit App Download

X32 Mac Software Download Windows 7

Software Updates

Behringer X32 Software For Mac